2012-07-26

YN460II modification with 3d printed parts

Brainstorming 

  1. Replace both front and back. 
  2. Make it slightly longer to have a hole for an umbrella mounting between battery compartment and electronics.
    Use the free space left of the umbrella for a 12V DC plug and on the right for a battery/mains power switch.
  3. That power level LED mod looks great. Better integrate that into the case right away.
    http://www.flickr.com/photos/malow/5948108074/in/photostream
    http://www.flickr.com/photos/malow/5948112440/in/photostream
  4. Integrate the PCB of a remote trigger. Later to be replaced by an Arduino Nano+RF (to not only trigger the flash but also remote control the power.)
    1. Looks like thee are 3.3V and 5V for the RF-trigger PCB already present:
      http://www.dslr-forum.de/showthread.php?t=819870
      http://www.dslr-forum.de/showthread.php?t=967445&page=2

Design

TODO

Final object

TODO

Keine Kommentare: